Breaking News

Steel Bar Bending Machine Safety

Steel Bar Bending Machine Safety


The bar bending machine is used to bend the bars in different shapes and sizes. It has been observed that many accidents occur (especially hand injuries) due to unsafe operations and non-compliance with safe operating procedures.





Steel Bar Bending Machine Safety




Bar Bending Machine



Bar bending machine Do’s:


* Remove all foreign materials such as hammers, tape measures, levers and other similar construction tools from the machine.


* In multiple bending, place the building material in the specified number, hold them and fix them against the retainer or bending sleeves, and then fold them.


* Fix the material on the machine correctly. Observe the fixing rules according to the operation manual using the retainer or flex sleeves and pins.

* Use only genuine spare parts and appliances manufactured by the same company.

* Only trained and experienced people will allow the machine to operate.

* Disconnect power before performing checks, maintenance, lubrication and adjustments.

* The machine must be covered with suitable sheds.
* Workbenches will be provided on both sides of the machine for safe and trouble-free work.

* Machine maintenance will be performed according to the preventive maintenance program.

* Ensure the use of PPE as safety gloves, safety shoes and helmet and safety glasses.




Bar bending machine Don’ts:

* Do not allow people to stand in front of the machine during the bending process

* Do not operate the machine when it is wet.

* Do not attempt to bend using bent, distorted and cracked appliances and sleeves that have an enlarged internal diameter.

* Do not try to bend a bar with a larger diameter than the one specified.

* Do not operate the machine when the electrical panel cover is open.


* Do not use compressed air to clean the machine.







No comments

Please do not enter any spam link in the comment Box.